Minor keys and their scales Part 1

Now that the subject of major keys and their scales has been covered, we can look at minor keys, how they relate to and differ from major keys, and  the structure of their scales.

Before we look at the structure of minor keys and their scales, it is vital that we hear how they differ in sound. Major keys are thought of as having a happy sound while minor keys sound sad. Although this is a very simplistic and subjective description, it’s a good start. The following two sound bites are the tonic¹ triads² of C major and C minor. The C major triad sounds brighter (“happy”), while the c minor triad sounds darker (“sad”).


 

 

The crucial note in these triads is the only one that changes and in doing so dramatically alters the sound of the triad. It is the middle note – the third step of the scale, also referred to as the mediant. In a major triad the mediant is an interval of a major third up from the tonic, and in the minor triad it is a minor third up. While this is not the only note that changes when we compare a major and minor scale with the same keynote, it is the first note to define whether the scale is major or minor.

¹ Tonic: the technical name for the first step of a scale, also known as the keynote
² Triad: a chord stacked in thirds (a tonic triad is made up of the first, the third and the fifth steps of a major or minor scale

Types of minor scales

Apart from the obvious difference in sound, minor keys differ from major keys in that they are more complex, and have three types of scales for each key as opposed to just one major scale for each key. The names of the scale types are natural minor, harmonic minor and melodic minor. All three of these scale types have an unmistakably minor sound, but each follows a different sequence of intervals. What they all share in common is the first five notes of the scale with that crucial minor third interval between the keynote and the mediant.

Natural minor scales

Using the key of a minor, which has no sharps or flats in its key signature, we’ll look at and listen to the natural minor scale first. The sequence of intervals is as follows:

Step 1 – 2 (a – b): whole tone

Step 2 – 3 (b – c): semitone

Step 3 – 4 (c – d): whole tone

Step 4 – 5 (d – e): whole tone

Step 5 – 6 (e – f) semitone

Step 6 – 7 (f – g) whole tone

Step 7 – 8 (g – a) whole tone

The natural minor scale is the oldest of our three minor scale types and is also referred to as the aeolian mode. The name is taken from the music theory of Ancient Greece, and was applied to this particular scale by the Swiss music theorist, Heinrich Glarean in the mid sixteenth century. A natural minor can also be thought of as the scale of C major started on the sixth step instead of the first. On the piano keyboard it uses only white notes, and looks like this:

It is worth mentioning at this point that every major scale has a related minor key which shares its key signature The relative minor keynote is always located an interval of a minor third down from the keynote of the major key (in other words, the sixth step of the major scale). Based on this and the fact that they share the same notes, it is easy to see that C major and A minor are related. Let us now observe and listen to the scale of a natural minor on the cello.

Advertisements

Major keys and their scales

I posted a similar article on keys in music some time ago, but since it is now buried under about two years’ worth of posts and several of my students have been in need of a study guide for major scales and keys with more focus on how they apply to the cello, here’s a new and improved version

Firstly, let’s define three important terms which often get confused and are therefore important to be distinguished from each other before exploring how they are related.

  1. Key: a family of notes which belong together and have a distinctive sound or “colour”. A key can be major or minor and is represented by a key signature (see definition 2). Every key has 7 individual notes which are represented in the scale (see definition 3) of the key.
  1. Key signature: a representation of the accidentals found in a key. These are shown at the start of each stave just after the clef and just before the time signature* and greatly reduce the number of accidentals that have to be shown in the main body of the score**. The order of accidentals in a key signature does not always follow the order in which they appear in the scale. Instead, they follow the order in which they appear from one scale to the next.
  1. Scale: a representation of the notes belonging to a key in ascending and/or descending order starting and ending on the key note (i.e. the letter name of the scale). A scale of one octave covers eight steps but since the first and eighth steps are the same note, there are only seven individual notes as mentioned in definition 1. There are 3 main types of scales: major (which represent major keys), harmonic minor and melodic minor (which represent minor keys). Each type follows a specific order of intervals***

* Times signatures, unlike clefs and key signatures, are only shown at the start of the first stave and do not appear again unless there is a change of time signature in the music

** Score: a written or notated representation of music

*** Interval: the pitch distance between 2 consecutive notes (e.g. C – D = a whole tone or major second; C – D-flat = a half tone or minor second)

The structure of Major Scales

All major scales – no matter what note they begin on – follow the same structure. They are made up of a sequence of whole tones and semitones as follows:

Step 1 – 2: whole tone

Step 2 – 3: whole tone

Step 3 – 4: semitone

Step 4 – 5: whole tone

Step 5 – 6: whole tone

Step 6 – 7: whole tone

Step 7 – 8: semitone

If we observe how the scale of C major is played on the piano, and then on the cello, we can actually see the difference between the whole tones and semitones. Let’s look at C major on the piano first:

The red notes indicate the notes played in the scale. Notice that no black notes are played (C major has no sharps or flats), and the whole tones are always between the white notes which have a black note between them. The semitones are between the white notes which do not have a black note between them.

Since the cello does not have a logical linear map of the notes like the piano keyboard has, a video is a better way to demonstrate how the scale of C major “looks” as well as sounds on the instrument. Pay attention to the semitones, which sound closer together and are physically closer together on the cello (in this scale played between the third and fourth fingers on both strings).

Key Signatures

Because the sequence of intervals must always remain the same, no two major scales will ever have an identical set of notes. All major scales except C major have one or more sharps or flats. These are shown in the key signature, which is found at the beginning of each stave. We use key signatures to show what sharps or flats will be present in the score without having to clutter the score itself with an accidental sign in front of each relevant note. For example, if a piece of music is in the key of D major, it will have an F-sharp and a C-sharp in the key signature. This means that whenever you encounter F or C in the score, you must remember that they are actually F-sharp or C-sharp. Why not just write the accidentals into the score? There are two main reasons for this. Firstly, a score with lots of accidentals in it is messy and harder to read. The more accidentals there are in the key, the messier the score would get. Secondly, it would make it much harder to recognise accidentals that don’t belong in the key. When the key signature is used, we recognise notes that don’t belong to the key straight away since they have accidentals in front of them while notes that belong to the key do not.

Key signatures never contain a combination of sharps and flats – only one or the other. With C major as a starting point, if we go a perfect fifth up (tone, tone, semitone, tone or seven semitones up), we find G. The key of G Major has one sharp in its key signature: F-sharp. From here, we go a perfect fifth up to find D. D major has two sharps: F-sharp (retained from the previous key) and C-sharp. A perfect fifth up from D takes us to A. The key of A major has three sharps: F-sharp, C-sharp and G-sharp. Are you beginning to see a pattern here? It’s called the circle of fifths. Not only do we find each new “sharp” key by going up a perfect fifth; the new sharp in each key signature is always a perfect fifth up from the previous new sharp. It is also worth noting that the new sharp in each key is always the seventh step of the scale. For “flat” keys, we return to C as our starting point and go down by a perfect fifth each time. Easy to remember: sharp=up, flat=down.

The following graphic shows keys and their key signatures, and should make sense if the above two paragraphs made sense.

Each major key has a related minor key which shares its key signature. But minor keys are a little more complex than major keys, and need to be covered in a post of their own.

Pairing Positions: Fourth and Seventh

This blog and its content is copyright of D C Cello Studio
© D C Cello Studio 2011 – 2014.
All rights reserved.

If you found these exercises helpful, please consider making a donation.

Pairing Positions: Third and Sixth

This blog and its content is copyright of D C Cello Studio
© D C Cello Studio 2011 – 2014.
All rights reserved.

If you found these exercises helpful, please consider making a donation.

Pairing Positions: Second and Fifth

This blog and its content is copyright of D C Cello Studio
© D C Cello Studio 2011 – 2014.
All rights reserved.

If you found these exercises helpful, please consider making a donation.

Pairing Positions: First and Fourth

This blog and its content is copyright of D C Cello Studio
© D C Cello Studio 2011 – 2014.
All rights reserved.

If you found these exercises helpful, please consider making a donation.

Introduction to Pairing Positions on the Cello

Cello students who have studied the entire range of the cello will almost certainly have discovered a recurring pattern of similarity between certain positions one octave and string apart. Recognising this pattern can be very useful when it comes to getting secure in the higher positions, the fear of which often causes poor intonation and inferior tone production. The pairing I’ll be discussing in this and the following four posts is as follows:

1. First and fourth positions:

1.1   First position on the D string and fourth position on the A string
1.2   First position on the G string and fourth position on the D string
1.3   First position on the C string and fourth position on the G string

Also:

1.4   Half position on the D string and upper third/ lower fourth position on the A string
1.5   Half position on the G string and upper third/ lower fourth position on the D string
1.6   Half position on the G string and upper third/ lower fourth position on the D string

2. Second and fifth positions:

2.1   Second position on the D string and fifth position on the A string
2.2   Second position on the G string and fifth position on the D string
2.3   Second position on the C string and fifth position on the G string

3. Third and sixth positions:

3.1   Third position on the D string and sixth position on the A string
3.2   Third position on the G string and sixth position on the D string
3.3   Third position on the C string and sixth position on the G string

4. Fourth and seventh positions:

4.1   Fourth position on the D string and seventh position on the A string
4.2   Fourth position on the G string and seventh position on the D string
4.3   Fourth position on the C string and seventh position on the G string

The first pairing (first and fourth positions) shares identical fingering patterns since both are neck positions. The same applies to lower second and lower fifth positions. From extended fifth position onwards, the three finger system comes into use, so the notes of the paired positions remain the same but the fingering does not. The changes are as follows:

In the higher positions, the second finger plays notes that would be covered by the second and third fingers in the lower positions.
In the higher positions, the third finger plays notes that would be covered by the fourth finger in the lower positions.
This discrepancy applies to closed and stretch (or extended) positions.

The following four posts will show these pairings through simple exercises and melody lines.